Emblaze-VCON VCB5 Guía de usuario descargar pdf (Pagina 11)

2 Defining the VCB IP Configuration

Emblaze-VCON Guide 5

2DEFINING THE VCB IP

ONFIGURATION

Before you can use the VCB for the first time, you have to define a unique IP

configuration for it. This task is made up of the following procedures:

T Retrieving the VCB’s initial IP configuration

T Changing the IP configuration to unique settings, such as a static IP

address

2.1 Retrieving VCB initial IP configuration

The following procedure describes how to get the IP address from the VCB unit’s

front panel.

1 Connect a network cable to any one of interfaces GbE1 to GbE3.

2 Turn the VCB unit on. A welcome message appears in the LCD display.

For standard operation, we recommend that you connect one NIC/one

interface. If nevertheless, you require connection through more than one NIC,

each NIC must belong to a different subnet.

Connect a network cable to the interface you configured only after completing

the configuration.

Connect to any one

of these interfaces.

Interface GbE0 has a fixed static

IP which cannot be changed.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 69 70

Sin comentarios

Emblaze-VCON VCB5 Guía de usuario Pagina 11