Emblaze-VCON VCB5 Guía de usuario descargar pdf (Pagina 14)

2 Defining the VCB IP Configuration

6 Emblaze-VCON VCB5 User’s Guide

Through the Front Panel

The following procedure describes how to get the IP address from the VCB unit’s

front panel.

³ To define a static IP address

1 Connect a network cable to any one of interfaces GbE1 to GbE3.

2 Turn the VCB unit on. A welcome message appears in the LCD display.

3 In the LCD display, press an arrow button until the

GET IP

command

appears. Press the

Enter

button.

4 Press an arrow button again until the connected network card and interface

appears (

NIC 1

NIC 3

= GbE1 to GbE3) and press the

Enter

button. The

VCB unit receives an IP address from the DHCP server.

5 Leave the cable connected to the chosen interface.

Select NIC:

172.20.21.22

If a cable is not connected to the interface,

0.0.0.0

appears in the display.

Connect to any one

of these interfaces.

Interface GbE0 has a fixed static

IP which cannot be changed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Sin comentarios

Emblaze-VCON VCB5 Guía de usuario Pagina 14