Emblaze-VCON VCB5 Manual de usuario descargar pdf (Pagina 1)

Emblaze-VCON Conferencing Bridge (VCB5) 5.1

SP1

Release Notes February, 2007

Fixed Bugs

1. VCB sent wrong bandwidth for systems that connected as a lower rate

than the conference rate.

2. Bad audio on Aethra in AAC-LD.

3. Broadcast viewers can't see video when systems are connected at a

lower bandwidth than the conference default.

4. Wrong display of Maximum video rate on the systems.

5. When systems are connected at a higher and lower bandwidth than the

acual configured conference bandwidth, the frame rate for the

systems at the lower bandwidth drops.

Dependencies & Limitations

1. When setting new IP Address in the VCB properties -> network

settings tab -> gatekeeper address , the new address is not

updated. VCB is logged in but all its services are logged into

management.

The workaround is to delete the VCB (from MXM Administrator).

After few seconds it registers itself again with all services logged

in.

2. When Aethra system dials in to a VS conference that is set to H.261

or H.263, in lower bandwidth than the original VCB configuration, it

connects with audio only.

3. VCB sends lower bandwidth than configured in H.264 + 4CIF

conferences. H.264 has variable bitrates output. VCB send lower

bitrate in order to make sure not to exceed the maximum allowed.

4. VCB sends a slightly lower frame rate than 30fps in H.261 and H.263

calls.

6. Low video quality when dialing out to Aethra system over ISDN.

7. HD3000/HD3000LT are recieving lower bandwidth than the configured

bandwidth of the VCB conference. Uncheck the Automatic Bandwidth

Adjustment option on the HD3000/HD3000LT will fix this.

8. Running SSH command cause wmiprsve.exe process to run.

9. Creating ~20 services via VCBconfig (one after one) cause some of

them to crash. Need to delete them and re-create.

10. If VCB is configured to second channel XGA and multicast is

enabled, EVC Broadcast Viewer doesn't see the data and video is

freezed (for the Viewer). Changing the second channel to CIF works

fine.

11. If endpoints are invited to VCB Conference through moderator, and

"Mute audio to all users when another user joins" is selected, the

audio channel is not opened and no audio is available. Use Mute/Unmute

only from the In Progress tab.

12.

VCB Config ->services layout ->there is an option to select 5*5 layout .

This layout should not be an option for SP1 (VCB doesn't support it)

As a result there is no video when selecting this layout.

Same in administrator, this layout 5*5 should be removed

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Fixed Bugs

Emblaze-VCON Conferencing Bridge (VCB5) 5.1 SP1 Release Notes February, 2007 Fixed Bugs1. VCB sent wrong bandwidth for systems that connected as

Pagina 2 - New Features

Emblaze-VCON Conferencing Bridge (VCB5) 5.1 Release Notes Sept, 2006 New Features 1. Mute Video and Audio in for one participant or for al

Pagina 3 - Interoperability Problems

The error may occur whenever trying to send notifications to emails that are outside the SMTP server domain according to SMTP Server Relay restric

Pagina 4 - Known Bugs

5. Polycom endpoints do not support data at QCIF resolution. 6. When VCB is configured for H264 codec on the data channel, only endpoints that support

Pagina 5 - Upgrading From VCB 2000

Dependencies & Limitations 1. VCB 4.25 can only be installed on English versions of Windows 2000 or 2003. 2. A VCB2000 that has been upgraded to

Pagina 6

When upgrading from VCB 2000, insert the VCB 2500 Upgrade CD into the ive and follow the instructions. dr Upgrading From previous version of Software

Pagina 7 - Minimum PC Requirements

VCON Videoconferencing Products VCON Conferencing Bridge (VCB) 4.0 Release Notes August, 2003 Release Capabilities 1. Dial-in or Ad-hoc confer

Pagina 8 - Known issues

1. Install VCB 4.0, no need to uninstall the VCB 3.1 first. Note - At the end of installation, VCB 4.0 will register itself to the MX

Comentarios a estos manuales

Sin comentarios

Emblaze-VCON VCB5 Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Gateways / Controladores Emblaze-VCON VCB5. Emblaze-VCON Conferencing Bridge (VCB5) 5.1 SP1 Release Manual de usuario

Indice de contenidos

Comentarios a estos manuales